GS 1000 with Yamaha YZF R6 RSU fork and GSXR 1st gen wheels

[80GS850GBob]

Here's my GS 1000 ST with the 1st gen fork and wheels.
It will take some time before you see the new project bike as it will be very special...[ATTACH=CONFIG]52931[/ATTACH]

Are the 1st gen gsx-r rotors 6 hole and dished?...can't make it out in the pic.

[John Kat]

Are the 1st gen gsx-r rotors 6 hole and dished?...can't make it out in the pic.

No, there are 5 holes but you can get rotors with different dish values if you want to use different forks or calipers.
My disk are from Mgear P/N 21.024 ( 300 mm O.D. 21.5 mm offset)
P/N 21.055 with 12.5 mm offset can be also be mounted on the same wheels as an example

[John Kat]

The All Balls bearing got here yesterday and I mounted them in the frame.
The fit is perfect!
Next comes the lockstop.
Here's a picture: