G-3 cams with stock sprngs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TxGSrider
    Forum Sage
    Past Site Supporter
    • Aug 2015
    • 1015
    • Flower Mound, TX

    #1

    G-3 cams with stock sprngs

    Maybe someone will know this, will G-3 cams work with stock valve springs?
    1982 GS1100E "Jolene"
  • blowerbike
    Forum Guru
    GSResource Superstar
    • Aug 2008
    • 7057
    • Ohio Closer to KY Than Cleveland

    #2
    i had no problems with .340 webs and a dead stock head...
    rule of thumb is any performance cams can use better springs/more seat pressure within reason...

    Comment

    • rapidray
      Forum Guru
      GSResource Superstar
      • Oct 2006
      • 8195
      • So Cal

      #3
      I use those cams with stock springs ONLY if I know the engine will NEVER be above red line. I also shim the stock springs if a person is just too cheap to do it CORRECTLY.
      Ray.

      Comment

      Working...