We are finally there!

[timebombprod]

Hey everyone, not sure how many members that were on here a few years ago still are. Long story short I had a gs650gl that I decided to rebuild and do a bigbore kit to make faster, 2 years later I finally finished it and decided to keep the motor stock as its never going to be as fast as I wanted.

Thanks to everyone who helped me on here over the years whether it was parts or technical help, all of it was appreciated.

Not sure If I'm going to keep the bike or sell it, I still have to take it for a ride and see how I feel but either way I'm more than satisfied with how things went.

https://youtu.be/sBmXGdgB2IE?si=gEGnyjBgU5AAyzLr

[Rich82GS750TZ]

Glad to hear it, Ian.

[Rob S.]

...decided to keep the motor stock as its never going to be as fast as I wanted.

Wise decision. One that I rarely made myself. Been here 11 years, here's to the next 11.

[timebombprod]

Wise decision. One that I rarely made myself. Been here 11 years, here's to the next 11.

THIS one will be kept stock, but the oil-cooled gsxrs i have waiting to be built will not be.

[timebombprod]

Glad to hear it, Ian.

thanks a bunch!


..

[Rob S.]

The oil-cooled gsxrs i have waiting to be built will not be (stock).

1100s, I hope? ..................... SACS (Suzuki Advanced Cooling System)

[timebombprod]

1100s, I hope? ..................... SACS (Suzuki Advanced Cooling System)

kinda lol

i have one 1100 roller, 4 750 frames, and a 750 with a b12 that needs a bit of work to be roadworthy, all of those are slabs, and then an 89 750 frame that i will probably build up first.


as far as motors go i should have enough setups to make 4 1100ish motors, i have a bunch of stuff lol..... the plan for the 89 is to use either a 1052 or 1127 cylinder with a 750 dothead head and cams, best head to use. but really i wont know what it'll be until i get to that point, once this bike is done and my zx7 is close to finished i will start building an engine.

i do have a complete 1052 engine but it will be sold, the reason is its more a collector motor than something you modify, its really an orphan of the family, not much shareable parts at all.

heres the 89 if the photo works, its been completely torn down and is going to be done right.

[LAB3]

Good to see you're still at it. There's a pretty good chance I'll be spending a lot of time in the Tampa area this winter, hit me up if you care to.

[Who Dat?]

Just watched the video. Nice to hear it finally run, but it will run even smoother if you plug that air leak on Number 2 intake.

[timebombprod]

Just watched the video. Nice to hear it finally run, but it will run even smoother if you plug that air leak on Number 2 intake.

What leak? The vacuum line is plugged up