some pics of my junk, 81 gs450

Dynajet kit 3113.And my gs750 runs 10w40

what is the difference between 80-82 and 83 carbs, there are 2 different kits?

Dynojet kit 3113.And my gs750 runs 10w40

2 questions

-what jet kit should I run?

-what weight and type oil do I use?

WOO-HOO
Them pipes are Bitchin'
LOVE IT!!!!!!

I agree about TIG for doing pipes but I've also done them with my MIG, just have to be carefull. Burning/welding galvanized pipe can be deadly, not just stinky. When that zinc burns off it's putting out fumes that will kill you if exposed too long, ventilation or not.

use meratic acid to gas out the galvanizing and weld like regular pipe

Ya i welded on galvanized.And it will make you sick!And It's a bitch to get penetration without burn through.My welds looked like chicken ****!LOL Until i built up enough material to run a nice bead.Or do a lot of tacks around the pipe

I agree about TIG for doing pipes but I've also done them with my MIG, just have to be carefull. Burning/welding galvanized pipe can be deadly, not just stinky. When that zinc burns off it's putting out fumes that will kill you if exposed too long, ventilation or not.

I tig mine but i got to much money invested in tools and not enough in bikes

now you cant tell us it sounds good without a video clip of her running.


btw the best way i found to weld pipes is brazing with the oxy/acet torch. did a set on my quad with a cl360 motor in it like that and never had an issue.



i never cleaned it up and i used fence post (burning/welding galvinized is never a good idea, unless yer in a well ventalated area). but it isnt a show quad, just a buggy for rippin around on

Lookin really good there bro !Keep it up!

I had the welder on the lowest setting and I was still burning holes here and there. I like it, sounds better than before too.

made some pipes today, still need to make tabs for the back and wrap them. also gonna clean em up a bit.

had to taper the ends to step down to the factory pipes]

used a body dolly and a ball peen hammer

That thing is lookin' mean!!!
Make sure to get some riding shots!
How much are those tires goin' for? I love the look of those.

$56 shipped. evilbay.

That thing is lookin' mean!!!
Make sure to get some riding shots!
How much are those tires goin' for? I love the look of those.