Project Super Thrill! 83 GS1100 GSXR

The bearings are from www.allballsracing.com . They have a very neat conversion bearing page. Simply enter your bike (steering stem) and it lists all makes and models and the bearings needed to convert. This does not take into account stem length though, which was the same for the GSXR stuff.



Will need to grind the stops after fully assembled.

All Balls part numbers.
Top bearing 30x47x12 99-3540-5
Bottom bearing 30x55x17 99-3519-5

Started out with 83 GS1100E and a pile of 07-08 GSXR parts! 07 complete 750 GSXR frontend and 08 GSXR rear wheel in factory swingarm.

Will start with the frontend first. Had to remove factory stops from 07 triple tree and weld on new ones. The had to contend with bearing stem differences. Thanks to All Balls bearings, they had the correct conversion parts in stock! $40 for the top converson bearing and $16 for the bottom.



Bearing race is very thin at the top. Kinda sharp so be carefull.