A 1000 2v going into a 80 750L

[cbrophy22]

I putting a 2v 1000 motor into my 80 750L. can any one help me with some pointers to the motor mounts. The rear bottom mount fits so far. I need to get some spacers and a couple of longer bolts to get the front hooked up,
but if any of you guys have a hint or pointer it could really help me out and save a lot of time
Thanks

[blowerbike]

it should bolt right in except for the left front i think it was.
you have to add a spacer i think.

[cbrophy22]

Back from the garage

I I was looking at the chain and it seems that it lines up pretty good but it looks like the whole motor is shifted to the right facing the front, so I slaped the pipe on it and it fits but it is touching the frame. not the worst but not perfect

[blowerbike]

I I was looking at the chain and it seems that it lines up pretty good but it looks like the whole motor is shifted to the right facing the front, so I slaped the pipe on it and it fits but it is touching the frame. not the worst but not perfect

what is touching the frame???
the pipe?