winter kat 1166 turbo

[amxsteve]

In the process of wiring the kat and have purchased the Dyna curve maker software for my 2000 and I want to use my air/fuel fails age to retard my ignition on a lean condition. What would be the cutoff for air/fuel and how far should I retard?

[amxsteve]

finished the wiring on the kat and ordered new brake lines cause the red didnt go,fabricated a new brake strut for rear out of 1x3/8 alum and am sending it to a buddys for engraving,not sure what i am putting on it. peeled out the clutch and sending out for a heavy duty backing plate and still waiting on my RBD cover and cable. friend of mine refinises wheels and just picked up a chroming machine so were gonna test it out on the kat wheels.fabricated a new dash for gauges and covered the windscreen and dash with genuine imitation 3m carbon fiber.new projector beam HID is BRIGHT

[Guest]

Buffalo is all done and turned out sweet in my opinion.as for the Zeds if i can swing a deal for Richards they will be gone in a heartbeat

Dang, that is one sweet smoker. That one should be on the cover of something. Wish I had the funds I would take it off your hands without even thinking twice.

[amxsteve]

Dang, that is one sweet smoker. That one should be on the cover of something. Wish I had the funds I would take it off your hands without even thinking twice.

Thanks. It will be featured in Cycle Canada as a showcase in the spring. For a little old 750 it loves to have the front wheel in the air anything above 6k

[posplayr]

Impressive set of projects you have going on there!!

[Guest]

How did you do the HID Headlight?
Tnx
G

[Guest]

If you want to know about boost and ignition timing contact Kris V on this site.

[amxsteve]

How did you do the HID Headlight?
Tnx
G

Just buy a headlamp that fits as they are readily accessible at any tuner store or evilbay and an H4 HID kit. It cost me $75 up here so in the states it would be ah free. The ballast is quite small but don't get the super small ones they are crap

[amxsteve]

received my lockup cover and put it on too bad its empty. looks impressive though. i am waiting on my new billet basket with HD backing plate to show.All bodywork out for paint and a new shinko rear coming as the 190 mounted is into the chain a hair also ordered a chain guard from schnitz and sending out a bunch of stuff for anodizing this week. installed new brake lines and bled the brakes and completed my turbo oil return line.

[Guest]

Hid

Okay, Just use the stock headlight with the HID bulb and conversion. Perfect!
Tnx
Greg

[amxsteve]

i guess i can say its finished and will have to wait for spring to see how it hauls. paint turned out real well and i gave up on the rim polishing so i had them painted too.bike will be on display at the Katana exibit on march 15-16 at the international center in Toronto. drop by and say hey

[steve murdoch]

There is a lot of muscle in that garage.
Looks great, Steve.

[GateKeeper]

i guess i can say its finished and will have to wait for spring to see how it hauls. paint turned out real well and i gave up on the rim polishing so i had them painted too.bike will be on display at the Katana exibit on march 15-16 at the international center in Toronto. drop by and say hey

I hope to make it to the show, will try to stop by and say Hello....

are you off on the date or am I

International Spring Motorcycle Show | Mar 16 - 17, 2013 | Public Welcome

Date - Mar 16 - 17, 2013
Category - Public Welcome
Entrance #1, 2
Registration InformationAdults: $18.00Youths (6-12 yrs old): $5.00Children (under 6 yrs old): Free

Dates and TimesMarch 16, 201310:00am to 9:00pmMarch 17, 201310:00am to 5:00pm

For more information visit: http://motorcyclespringshow.com/

.

[amxsteve]

I hope to make it to the show, will try to stop by and say Hello....

are you off on the date or am I



.

i must of messed up thanks. Not sure when I will be there

[GateKeeper]

I will probably try for the Saturday, but if you have a confirmed day at some point let me know....

hope to see you there...