A skunk in the works

What kind of primmer are you spraying?
Is it rattle can?

Good choice Greg, she's going to look sharp!

Getting off the fence and going with the Red Skunk.Not doing the line in the white..

I'll be sending you my side cover from Hell soon.

Eric

Sandpaper is your friend

I'll be sending you my side cover from Hell soon.

Eric

Sanded off the tail to bare plastic,well mostly

No checkingOK a bit where the reflector goes but I'm not worried about that.

Yeah I started a thread on the problem http://www.thegsresources.com/_forum...d.php?t=190192 .Looks like more sanding

I feel your pain... The first paint I laid down on the tank was mottled because I hadn't researching painting with pearl paints... my technique was all wrong! I didn't have to go back to bare metal but I had to sand it back a bit and start again....

Yeah I started a thread on the problem http://www.thegsresources.com/_forum...d.php?t=190192 .Looks like more sanding

Nice progress Greg!

On the primers... I just know what Dale and Larry would say, sand it back and start again... and I reckon that makes sense. If your primer is having issues, imagine what the top coat's going to do... sorry to say that though

I've usually had to sand it all off and everything close by and make sure it's absolutely pristine before spraying again. Good luck.

Here's where I have a problem:



Two different primers have caused the tails paint to "check".Can I just sand the primer smooth or do I need to sand all the paint off?

Thanks Sci,plastic welding works great for the pieces that are not ABS.For the ABS ones slurry is the best.Speaking of that:



Filled the repairs with bondo and primed it up.

Did the tank to,found a few more shallow dents so I filled those.



Used self etching primer on the tank.Need to use filler primer to get it prefect but I'm pretty close
cont

Awesome work SV. I have some plastic repairs to do myself and now I know how!

I posted yesterday.No I'm still in the process.

WHat does this bike look like now? Did you ever finish it?