82 kat Re-build

Collapse
X
Collapse
 
  • Page of 6
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 5 6 template Next
  • GateKeeper
    #46
    Originally posted by 6pkrunner
    Her's a Canadian 750 Kat in my neck of the woods. Guys is asking $1500.
    who is selling this bike ?

      Comment

      • Guest
        #47
        Here's the link to the Kijiji page. It is in Dartmouth (Halifax), Nova Scotia. I got a quote years go about shipping a bike across Canada. For what the bike was, it wasn't worth it. But you got wood over an '82 750 here ya go

        Katana

          Comment

          • amxsteve
            #48
            Good thing it's not in Ontario or it would be in my garage already

              Comment

              • jwhelan65
                #49
                Ah..some thread jacking going on here..

                  Comment

                  • jwhelan65
                    #50
                    There is an 82 Katana in there somewhere..I think.

                      Comment

                      • GateKeeper
                        #51
                        Glad to see the thread is back on track....

                          Comment

                          • jwhelan65
                            #52
                            Some progress


                              Comment

                              • jwhelan65
                                #53

                                  Comment

                                  • Guest
                                    #54
                                    Good stuff Joe, now *that's* looking more like a Kat!

                                      Comment

                                      • jwhelan65
                                        #55
                                        Originally posted by pete
                                        Good stuff Joe, now *that's* looking more like a Kat!
                                        Thanks Pete, long way to go..

                                          Comment

                                          • Guest
                                            #56
                                            Originally posted by jwhelan65
                                            Thanks Pete, long way to go..
                                            Aaah but not as far as I do Joe... I've gotta get the funds to buy one yet!

                                              Comment

                                              • John Kat
                                                Forum Sage
                                                • Oct 2010
                                                • 1433
                                                • France
                                                #57
                                                Originally posted by jwhelan65
                                                Some progress


                                                Very nice project
                                                Does your front end come from a GSXR 1100?
                                                I would be concerned by ground clearance with this type of fork?
                                                Having a 4 into 1 will help but it will still be very low...
                                                I did a project with the RSU version of this fork and here's the result.
                                                The unloaded fork length was 745 mm ( front axle to stanchion top)
                                                In the end I used Bandit Ph1 stanchions at 775 mm to regain the lost height.
                                                sigpicJohn Kat
                                                My bikes: CB 77, GS 1000 ST Cafe Racer with GSXR 1052 engine, GS 1000 ST, XR 41 Replica with GS 1085 engine,
                                                GS 1100 SZ Katana with GS 1135 EFF engine, KTM Superduke 1290 R 2020

                                                  Comment

                                                  • pontiacstogo
                                                    #58
                                                    Looks good!

                                                    Modded Kats are sexy beasts .

                                                      Comment

                                                      • T8erbug
                                                        #59
                                                        Originally posted by John Kat
                                                        Very nice project
                                                        Does your front end come from a GSXR 1100?
                                                        I would be concerned by ground clearance with this type of fork?
                                                        Having a 4 into 1 will help but it will still be very low...
                                                        I did a project with the RSU version of this fork and here's the result.
                                                        The unloaded fork length was 745 mm ( front axle to stanchion top)
                                                        In the end I used Bandit Ph1 stanchions at 775 mm to regain the lost height.
                                                        Which tank do you have on your bike? I'm looking for one of these in good shape

                                                          Comment

                                                          • posplayr
                                                            Forum LongTimer
                                                            GSResource Superstar
                                                            Past Site Supporter
                                                            • Dec 2007
                                                            • 23673
                                                            • Tucson Az
                                                            #60
                                                            That Kat looks great Joe, I have been anxiously awaiting the unveiling of the EZ but now the Kat is making me drool

                                                              Comment

                                                              Previous 1 2 3 4 5 6 template Next
                                                              Working...