gs550/650 build

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mickeydee

    #1

    gs550/650 build

    ive done a search and cant seem to find what im looking for.ive started doing a 550/650 conversion(550 bottom end with 650 top end)and was wondering about cam timing.im using ther 550 cam sprokets on the 650 cams and was wondering if i set the cam timing just like the 550 manual says or do i need to slot the cam sprokets and redegree them?

    thanks in advance
  • mickeydee

    #2
    well i found the anwser but not here on this forum.turns out i had cams from a 650g motor and the lobe centers were way off.I ended up aquiring some 650e model cams and they will work just fine

    Comment

    • Rover
      Forum Sage
      Past Site Supporter
      • Mar 2009
      • 1537
      • Central Mass.

      #3
      Welcome to the GSR.
      http://i632.photobucket.com/albums/u...00080021-1.jpg
      1978 GS1000C
      1979 GS1000E
      1980 GS1000E
      2004 Roadstar

      Comment

      Working...