82 GS750E to GSXR1215 restomod

[Guest]

Ok I don't remember but the bag they came in has a tag on it that says road bike low with the numbers 754-01-gr the bars also have 754 on them

[Guest]

Thank you!

[Guest]

A couple of pics with header installed

[240punk]

Looking very rad

[salty_monk]

It's a 35mm 750e front

Even better... these should drop straight in... http://www.mikesxs.net/products-19.html#products

and you can still run the twinpot brakes

[Guest]

Those fork emulators are interesting may have to get some. I'm gonna stick with the calipers I have for this year hope to upgrade the whole frontend next winter

[Guest]

more pics

rebuilt calipers on


after a epic battle with the carbs (38mm into 36mm boots) i resorted to drastic measures using mechanical advantage (not my proudest moment) and it worked


more pics of progress

[Guest]

my brake hoses arrived from Spiegler today very! nice should work and look great on the bike.

[DannyMotor]

Those hoses look sick! The whole bike is looking great!

[Guest]

I got front brake hoses on filled with new dot4 bleed with the aid of a vacumbleeder front brakes done!
































I set the body parts on to kinda get a look at it almost whole

[7981GS]

Looking sweet but might I suggest a much larger mid pipe on that exhaust system?

Eric

[Guest]

That is something i have considered but in my experience with this header collector it is very good at mid and lower rpms. A larger collector and midpipe may be better as I'm no expert on headers i asked that same question when this system was developed and they said no this will work better overall.

[Guest]

Started the beast today

https://www.youtube.com/watch?v=yLXl_agFj74&feature=youtube_gdata_player

[7981GS]

Sound's great!

Eric

[hampshirehog]

Yep, sounds great. Need to tighten your rear brake lever though