mono shock question

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • wesmoon

    #1

    mono shock question

    I'm in the process of converting my gs1100 to mono. What thickness steel should I use for the mounts? Cross bar is 1.25 x. 125 don tube. Thanks
  • DannyMotor

    #2
    Anything an eighth of an inch to a quarter inch should be plenty. Stay away from solid round-bar. Feel free to x-brace or v-brace the top of the bar where you plan on mounting the knuckle or clevice. The frames not designed for a mono-shock, so any bracing or little corner gussets would help a ton.

    Comment

    Working...