Maybe I will get down when the weather gets nice. I always hate that drive around the west end of the lake....way too much traffic and alot of sub-standard driving. I probably will be going to my daughter's rowing regatta in St. Catharines in the spring. Maybe I'll try to stop in while I'm in the area.
Announcement
Collapse
No announcement yet.
"The Timewaster" my '78 GS1000
Collapse
X
-
Guest repliedOriginally posted by spyug View Post
Maybe I will get down when the weather gets nice. I always hate that drive around the west end of the lake....way too much traffic and alot of sub-standard driving. I probably will be going to my daughter's rowing regatta in St. Catharines in the spring. Maybe I'll try to stop in while I'm in the area.
-
Guest repliedDang I can't see the pics my friend. It sounds interesting though. You did a lovely job on the engine so I expect the rest will turn out just as nice.
Friend Gatekeeper in Mississauga and myself in Hamilton are about to start in on 2 Yammie FZ 750s (just for something a bit different). Mr. Gatekeeper did a fabulous frame off resto on his GS750 last year so if you need some inspiration have a look. maybe come the good weather you could come down and see it in person. It really is stunning.
Good luck with this one.
Cheers,
Spyug.
Leave a comment:
-
Guest repliedI thought I'd give a quick update on what I've been up to. After checking e-bay for cafe seats, and not finding the size/shape that I wanted, I decided to make my own. I started with some foam:
The first layer of fibreglass on the finished mold:
I've still got a crapload of work to do, before it's finished, but overall I'm pretty happy with the shape of the seat. After 4 layers of fibreglass:
Last edited by Guest; 01-27-2013, 02:09 PM.
Leave a comment:
-
Originally posted by beast794 View PostKiller job on the motor.
I'm doing a 1979 GS1000S and have to know, How did you get the case covers shined up like that?
You can get loads of info in the appearance section (use search function)
Leave a comment:
-
Guest repliedIs it an airborn sickness? Cough in my general direction. Looking good.
Leave a comment:
-
Guest repliedOriginally posted by beast794 View PostKiller job on the motor.
I'm doing a 1979 GS1000S and have to know, How did you get the case covers shined up like that?Originally posted by tkent02 View PostAnd how did you get rid of the ridges around the decals on the state and ignition covers? File them by hand?
Then I spent a bunch of time on the buffing wheel with black polishing compound, then brown, then white.
When that was done, I hand polished with Mother's Aluminum Polish.
Yeah, it's kind of a sickness.
Leave a comment:
-
Originally posted by beast794 View PostKiller job on the motor.
I'm doing a 1979 GS1000S and have to know, How did you get the case covers shined up like that?
Leave a comment:
-
Guest repliedEngine
Killer job on the motor.
I'm doing a 1979 GS1000S and have to know, How did you get the case covers shined up like that?
Leave a comment:
-
Guest repliedOriginally posted by steve murdoch View PostWhatever direction you end up in the resto, i vote you keep the spokes.
How do you like the FZ8? Yosh pipe? Quick?
Loving the FZ8 and the Yoshimura. I just got it in December, but with this mild weather, I've managed to get a bit over 400km on it. Quarter way through the break-in!
Leave a comment:
-
Whatever direction you end up in the resto, i vote you keep the spokes.
How do you like the FZ8? Yosh pipe? Quick?
Leave a comment:
-
Guest repliedOriginally posted by steve murdoch View PostThe engine looks great. I like the black.
The area around the plugs has some "patina". Did you change the top end?
I did paint the engine with the valve cover on, so the paint coverage on the top of the head is sketchy. I'm sure it won't be noticeable when the engine is back in the bike.
I really have no idea of the history of the bike. The guy I bought it from hadn't had it for long didn't know or share alot about it. I think it spent alot of time outside, and I don't think it's been washed since the mid eighties.
Leave a comment:
-
The engine looks great. I like the black.
The area around the plugs has some "patina". Did you change the top end?
Leave a comment:
-
Guest repliedOriginally posted by shadow View PostHey guys, I joined the site last year when I picked up this rough GS1000 for cheap. It needed a ton of work, but I got it just to keep myself entertained all winter.
Just thought I'd start a build thread on it so show my progress. It'll be long term project as I'm working on it very slowly in my spare time.
Here it is as I bought it.
Not pretty!! The tank was not the correct one, in fact it did not even fit. It was tied on with wire. I've managed to find a later model 750 tank that does fit, but the petcock is not in an ideal location.
I got the bike running last year and took it for a short ride, just to make sure the transmission worked before I put any money into it. I am absolutely committed to NOT allowing this to turn into a complete money pit. Everything checked out so the project began.
I pulled the motor to get a broken exhaust stud, clean everything up and paint it. I checked the valve clearances and they were all within spec. That really surprised me, as did the cleanliness of the inside of the motor.
I'm calling it "The Timewaster" so I thought I'd waste some time polishing the engine covers.
The engine is all done and ready to go back in....too bad the rest of the bike isn't quite ready. Here's how she's sitting right now.
I've been gathering bits and pieces along the way. I found a decent '79 tank, a 4 into 1 exhaust, some side covers, and a few other bits. I've got a ton of work to do but I'm in no rush. Those wheels are going to take more than a few hours.
I'm not exactly sure where this project is heading. My vision of the end result is constantly changing. I'm leaning towards a sort of cafe type of thing. I'll try to update this thread as I progress. It may be slow.
I'm a spoke wheel fan anyway.
I respect the low cost/high value method of the resto.
Will watch the progress.
Leave a comment:
-
"The Timewaster" my '78 GS1000
Hey guys, I joined the site last year when I picked up this rough GS1000 for cheap. It needed a ton of work, but I got it just to keep myself entertained all winter.
Just thought I'd start a build thread on it so show my progress. It'll be long term project as I'm working on it very slowly in my spare time.
Here it is as I bought it.
Not pretty!! The tank was not the correct one, in fact it did not even fit. It was tied on with wire. I've managed to find a later model 750 tank that does fit, but the petcock is not in an ideal location.
I got the bike running last year and took it for a short ride, just to make sure the transmission worked before I put any money into it. I am absolutely committed to NOT allowing this to turn into a complete money pit. Everything checked out so the project began.
I pulled the motor to get a broken exhaust stud, clean everything up and paint it. I checked the valve clearances and they were all within spec. That really surprised me, as did the cleanliness of the inside of the motor.
I'm calling it "The Timewaster" so I thought I'd waste some time polishing the engine covers.
The engine is all done and ready to go back in....too bad the rest of the bike isn't quite ready. Here's how she's sitting right now.
I've been gathering bits and pieces along the way. I found a decent '79 tank, a 4 into 1 exhaust, some side covers, and a few other bits. I've got a ton of work to do but I'm in no rush. Those wheels are going to take more than a few hours.
I'm not exactly sure where this project is heading. My vision of the end result is constantly changing. I'm leaning towards a sort of cafe type of thing. I'll try to update this thread as I progress. It may be slow.Last edited by Guest; 01-27-2013, 02:05 PM.Tags: None
Leave a comment: