need help finding parts

[gs850cafe]

im rebuilding my spare 850 engine

i cant find piston rings...standard bore

do i need to change anything else? the motor did have stuck rings, but has 27k? miles on it..but did have a nice 180 psi on 3 of the cylinders

also is this the gasket set i should get?

http://www.ebay.com/itm/Suzuki-GS-850GL-1980-1981-Top-End-Gasket-Set-Kit-GS850GL-850-/380565803011?pt=Motorcycles_Parts_Accessories&hash=item589b7d5003&vxp=mtr

[bbjumper]

Boulevard Suzuki has rings and gaskets, OEM is the best way to go, there have been problems with some aftermarket gaskets.

Check here

http://www.boulevardsuzuki.com/fiche...1982&fveh=2144

This is for an 82 model, just navigate your way to the correct year model, probably no dif but just to be sure.

cheers

[gs850cafe]

guess i have to go through and find all the individual gaskets i need?

[bbjumper]

It's not bad, just start at the base gasket and work your way up. Don't forget valve stem seals. When I did this last year ALL seals, o-rings and gaskets in or attached to the cylinders or head were replaced with new OEM parts. Got 8k on it since and she is still dry.

Cheers

[gs850cafe]

ok so im lost...what all numbers am i looking for here...i found the rings...but do i dont know what other things other then obvious headgasket and lower gasket im looking for

http://www.boulevardsuzuki.com/fiche...1980&fveh=2142


how many number 6 do i need and what about those small ovalish looking rubber gaskets


http://www.boulevardsuzuki.com/fiche...1980&fveh=2142

[cowboyup3371]

The fiche tells you how many are required by the #REQ = number required