GSX750 Project

[Woodsy]

Thanks SVSooke, yes all sorted lol

Painted the front forks today in KBS rust seal, rebuilt the anti dive units as they were seized. Will put a top coat of KBS blacktop on the forks tomorrow to make sure they stay nice and glossy.

[Woodsy]

Forks in. Just deciding what to do with the paint colour now, i'm tempted to go the original colour below. As i found it on the inside of one of the plastics.



Any GS750 owners gone to clubman or superbike bars? Just wondering what the options are with the single bolt standard mounts?

[Guest]

I like that blue Josh...

[Woodsy]

I've been trying to find its colour name or code but can't find anything

[Woodsy]

Ok i'm not to sure what i'm looking at here, Apart from a Previous Owners big mess.

Now, i know this lead is needed to get power to the wiring harness of the bike so it can power the beast, however, is this correct in how its installed? Apart from the dodgy crimp connections? I'm thinking of replacing the Main Battery lead to the starter solenoid and fixing the harness power lead to go to the same terminal on the starter solenoid to tidy it up.


Cut wires, oh this looks like good news..


One Melted Fuse Box


If anyone can shed some light on the Wiring it would be appreciated!