.png "Powered by vBulletin")
I bought this 79 gs750 and some crackhead had taken the engine out. The motor mounts dont seem to line up exactly. Anyone got a picture of the ones that go in the front and back the orientation of them? I searched the web but can't tell.
-
-
If it's like the 1000 GS,the rear has 2 straight mounts and the front has a slightly kinked mount on the right(throttle) side and a straight mount on the left.When I fitted a GSX engine into my 1000 frame I had to use 2 kinked mounts as the casing for the GSX is slightly narrower,I also had to use a small round file to take about 3/4 of a mm out of the rear mounts.Hope this is some help and doesn't cause you further confusion!!!!.Johnny -
on a 750 all of the mounts are strait, I can take pictures of the placement for you, do you know why they pulled the motor? I hate to see you put it all back together just to pull it apart again. Basscliffs website has the service manual for our bikes also free to download.Comment
Comment