Announcement

Collapse
No announcement yet.

Vin question on project bike

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vin question on project bike

    I bought what I thought was a 79 GS850G and have tried to cross reference the Vin without any success. Its not 17 fidgets. Frame Vin : GS850105655 Engine Vin : GS850-105658
    I'm going to be rebuilding the carbs and are not sure if they are VM26SS or BS34SS.
    Any help would be greatful as I am at a dead end with my knowledge of GS's.

    #2
    The VIN is GS850-105655, the engine number never matches the VIN on the old Suzukis.

    This bike came with VM26 carbs if it is a 1979 model. The '79 came with a kick starter, the later 850s didn't have it and came with BS carbs. Does yours have the kickstarter?


    Life is too short to ride an L.

    Comment


      #3
      It does have the kick start

      Comment


        #4
        OK, the only 850 with kick start and VM carbs was the '79.


        Life is too short to ride an L.

        Comment


          #5
          So they are mechanically actuated and not constant velocity correct ?
          Have had problems with the vaccumm lines and feed line from the petcock . they were off and notnsuren of placement.

          Comment


            #6
            Yes, the throttle cable turns a shaft which raises all of the throttle slides mechanically. Vacuum line from the port on the #3 carburetor goes to the petcock. The other ports that look the same on #2 and #4 are float bowl vents.


            Life is too short to ride an L.

            Comment


              #7
              Thank you! First hurdle taken. Now I can order parts.

              Comment


                #8
                What parts do you need?


                Life is too short to ride an L.

                Comment


                  #9
                  Just answered a similar question for another member.

                  Per these references:
                  http://www.ozebook.com/compendium/su...-nos/page2.gif
                  http://www.ozebook.com/compendium/su...-nos/page3.gif

                  1979 "N" model GS850GN:
                  frame #s start @ GS850-100370
                  engine #s start @ GS850-100393

                  1980 "T" model GS850GT
                  frame #s start @ GS850-116457
                  engine #s start @ GS850-116520

                  Your frame VIN: GS850-105655 & engine VIN : GS850-105658
                  are both 1979 "N" model year.

                  The frame & engine VIN are close, which is what you would expect for an original motor.

                  Comment


                    #10
                    Need carb holders (intake boot), jet kit, engine gasket set.
                    Also, the connection for the tach is broken ( metal rectangle that fits into the tach cable). Don't know if this can be easily replaced or if I need to find an electric one.

                    Comment

                    Working...
                    X