My GS550E So Far

[shiner83]

Hello there!!!

Before i go and chuck more money at her ( the bike) I was wondering if any one could help me out.

I have just put the engine in and want to see if she fires up, Im new to building and would like some info.

Also when i put the back wheel on it looked off centre and to the right, but i had no chain on, this does not look right at all !!

Looking from behind the left swinf arm leg goes in a bit is this right ? or is it bent ?

Thanks in advance

[Guest]

Should be symmetrical to the centre line in plan view. I'll try to get some measurements and a photo later.

[shiner83]

Should be symmetrical to the centre line in plan view. I'll try to get some measurements and a photo later.

ok thank you

[Guest]

Hope these help:

[shiner83]

Hope these help:

Awesome stuff thanks Steve!!! looking at your pics mine looks likes your left swing arm thought the dent was a buckle will get measuring

[tkent02]

Show us a picture of all of the spacers and such on the axle?

[shiner83]

Show us a picture of all of the spacers and such on the axle?

nope mine is had it, its bent inwards damm new one and re-spray it is.