.png "Powered by vBulletin")
Rebuilding front forks. The tubes where bent in p.o. Death wiggle/ laying it down.
-
-
Do you have replacement tubes?Originally posted by Bluesmoke69 View PostRebuilding front forks. The tubes where bent in p.o. Death wiggle/ laying it down.sigpic
83 GS1100g
2006 Triumph Sprint ST 1050
Ohhhh!........Torque sweet Temptress.........always whispering.... a murmuring SirenComment
-
A shop, that is local is going to straighten them for 50.00 dollars.Originally posted by Charlie G View PostComment
-
Bluesmoke, you've got some skills
Most people can't straighten out that thin metal on the gas tank
I can't help but notice that the bike has a 78 tail on it. Is the choke a lever on the left side of the carb?1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
-
Yes the choke is on the left side. The bike is a 1978 gs 1000 with an 1100E tank I believe.Originally posted by Big T View PostComment
-
Cleaned up four into one pipe I got for 30.00 dollars.
Comment
-
Think of going this route on exhaust.
Comment
-
Comment
-
Put front end back together after tubes where straightened , only to find out that lower triple tree in bent.
Comment
-
Fork ear I got where to narrow for my head light bucket, plus it is cracked in two spots. I thing I am going with this one I had laying around.
Comment
-
Another picture.
Comment
-
Tank done not perfect, but pretty nice!
Comment
-
Got new triple tree today. All put together and straight as an arrow!!
Comment
-
New use 650 gauges attached for now that I received fro PO.
Comment
-
Hooked up cables but no lights until I decide if I want stock gauges or aftermarket gauges.Comment
Comment