83 1100E Bandit swap. I'm almost done!

[Mario]

Hey all, got the front and rear back on after painting. Starting on bodywork now. Having trouble lining up the tail and seat. I would kill for a tail without broken tabs.

[posplayr]

Hey all, got the front and rear back on after painting. Starting on bodywork now. Having trouble lining up the tail and seat. I would kill for a tail without broken tabs.

Looks like that is going to be a very nice setup. I see you retained the stock rear brake lever so I assume you moved offset the arm. Rotors also look nice. Just adding up what you have into those shocks, exhaust and rotors is a pretty penny. Did you get the arm from Rob (Katman)?

You should look up plastics repair. There are some products that are apparently very strong. I would not recommend the HF plastic welder(at least teh plastics rods they had). It did not work very well. I used some epoxy to reinforce mine, but they were not yet broken.

[niclpnut]

Looks good brother.

[Mario]

Rear master was a super pain to retain stock master. But it works.

[Guest]

Bike looks great, more pictures. And how did you do the rear brake setup?
I have fixed many broken tabs on my side covers with a product called plastifix... this stuff is sooo cool.

I have built new tabs on side covers and repaired the tail seat unit. So far zero failures.
I love those shocks... and the exhaust, I want a setup like that for my E.

[TiiMuch]

Wicked good looking bike Mario.


Yes, can we some pictures of the rear brake master and pedal?

[posplayr]

Wicked good looking bike Mario.


Yes, can we some pictures of the rear brake master and pedal?

Not sure how he did it, but this is one way.

http://www.thegsresources.com/_forum/showthread.php?135919-1st-Gen-GSXR-upgrade-for-GS1100ED&p=944934#post944934

[mattfeet]

I want those Ohlins so bad.