81 1100E Morph

[lor109]

Daughter.jpgMy daughter wanted to try out the new seat! This is basically how it sits now. I've started working on new side covers from sheet metal and I'll post some pics up soon with those. I also plan on shrinking the front fender. Now if the weather was just warmer! Below is a list of all of the mods/repairs etc. I've done to the bike.

Round headlight + CNC Black Brackets
Clip-on Bars + White Grips
Bar end mirrors
Gauge cluster delete (What a PITA!)
Bandit Speedo
Tach Delete Plug
Correct Fuel tank + Pet Cock rebuild
89 GSXR 750 Slingshot Carbs - MJ=150, PJ=37.5
K&N Dual Oval Filters
Blue Fuel Lines
Rebuilt Starter Clutch
Valve Lash Adjusted
Valve Cover Gasket (removed a bunch of red goop that wasn't keeping the oil in!)
Shortened Tail Section
Custom Seat Pan and Seat
Custom License plate bracket
Aftermarket Signals and Flasher Relay
Throttle Tube replaced
Repaired Leaky Kerker Exhaust (It's good to know a welder)
Started Polishing Engine cases

Things on the list to still do:
Finish Side Covers
Finish polishing and cleaning
Vinyl Wrap front forks and Speedo housing
Aftermarket rearsets - already purchased

Again thanks for anyone who unknowingly helped me with this build by posting to this forum!

[lor109]

Side cover cutting.jpgCutting out basic design for side covers

[lor109]

Ride.jpg Out for a ride finally! Its running like crap at low throttle/idle. Lots of popping and a bog at less than 1/4 throttle. I believe I need to adjust the float heights. Other than that this bike screams!

[huntb]

Wow... I really like it

[rudeman]

What jetting changes have you made?

[ATTACH=CONFIG]42661[/ATTACH] Out for a ride finally! Its running like crap at low throttle/idle. Lots of popping and a bog at less than 1/4 throttle. I believe I need to adjust the float heights. Other than that this bike screams!

[lor109]

89 GSXR Slingshot carbs. Main Jet 150 - Pilot Jet 37.5. I found these jetting recommendations somewhere in these forums. I did not change the float heights from stock and I read somewhere that on the GSXR these carbs where angled more. So I'm thinking the first thing I should do is adjust the float heights lower. At higher throttle it runs great.

[lor109]

Haven't posted in awhile. But I haven't been idle! Updated wheels and suspension to 93 gsxr 600 parts. 180 rear tire, 530 chain and sprockets, rearsets mounted. 20160529_111225.jpg

[Guest]

What did you do with the old "lunchbox" headlight?

[TeamNeal]

Is that an offset countershaft sprocket I see?

[lor109]

What did you do with the old "lunchbox" headlight?

Still have all the original parts with the exception of the gauge assembly. Let me know if you need something.

[lor109]

Is that an offset countershaft sprocket I see?

Yessir. I had to take 2mm off of the countershaft bushing to clear the frame though.

[GS1150Pilot]

That is a pretty cool bike!

[lor109]

20160602_000612.jpg
Almost there

[TeamNeal]

That is looking super awesome! Where did you source that offset sprocket, if I may ask?

[lor109]

That is looking super awesome! Where did you source that offset sprocket, if I may ask?

http://shop.pbisprockets.com

It's a 17tooth 5/8 offset
Total with shipping was 60 bucks. Really nice quality.