1977 GS750 Cafe/Brat Build

[rlink182]

Some guys can be real dicks there, but you seem to be doing it right, so I don't think you'd get any flak.

However, can't you just embed the photos in your post by linking to them at instagram? Otherwise I use photobucket for my build thread and it works great.

instagram might work better, I was not posting all my pics on instagram, but I might start and try that out

[rlink182]

test area for instagram pic

[Guest]

[ATTACH=CONFIG]46088[/ATTACH]

So is there a trick for posting more than one picture per post?

[ATTACH=CONFIG]46089[/ATTACH]

For you Mark

Excellent, thanks.


Mark

[Nessism]

Here is a guide for how to post photos on the forum so they are easy to see and more than one per post...http://members.dslextreme.com/users/...t_pictures.pdf

[rlink182]

@Nessism - Thanks, I was really not looking forward to creating a photobucket account. Instagram didn't seem to work

[rlink182]

13435389_10154104045475090_3598480191510510510_n.jpg
Went through my shims last night, I need all new shims. not a single one was in spec, or even close to being in spec actually.

[rlink182]

13466070_10154104719375090_8973036923674207312_n.jpg
I have 99% of the wiring stuff that I need to do the job, I am just waiting to get the bike mostly back together first before I start trying to route the wires

[Guest]

What type of connectors are you using for the wiring?

Are you able to swap shims around? I put together a chart of what I had and what I needed, then ordered the few that I needed and swapped the other ones around.

[rlink182]

@JonnyC - I was hoping I was going to be able to swap them around, but they are all 2.75 or 2.70 and they are all .02mm-.06mm all way to tight. I am buying into the shim club and I will get it all sorted out.

In regards to the wiring connectors. I will be soldering/silicone/shrink wrap for all the connections that don't need to be removable. The removable connections will be made with weatherpack connectors. Definitely a little overkill, but I don't want any issues with my wiring.

[rlink182]

Shim Specs.jpg

Shim order

[rlink182]

Kickstarter only bike, removed the starter, plugged the whole, removed battery. 13502982_10154111318860090_8555543381302265970_o.jpg

[rlink182]

Rear hoop mockup
13503103_10154114395870090_4571273132421754522_o.jpg

[rlink182]

Side profile picture mockup of headlight height.

13433137_10154109018660090_979140779142681916_o.jpg

[rlink182]

Front View
13482889_10154109020040090_6944267394222466552_o.jpg

[rlink182]

Time for more updates, this was a very productive weekend:

Here is the hoop cut and waiting for welding
13490770_10154126398990090_7755750733751487959_o.jpg