Announcement

Collapse
No announcement yet.

Hall of Shame

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    They bigger they are, the harder they fall.
    Broke the crank at about 155. Fortunately the rear tire never locked up and my wife got it stopped with both tires on the ground. It bent the motor plate and damaged the frame.





    Comment


      #17
      Originally posted by Eli69
      the shamefullness here is subtle yet made the bike unrideable.

      Is it the rounded off dogs? won't stay in gear?

      Comment


        #18
        Is that one of the unusual 2.5 cylinders? I heard they run great right before they puke th 1.5 extra cylinders.
        I've been pretty lucky and not broke anything near that spectacularly. Of course my stuff isn't that spectacular to start with!

        Comment


          #19
          Originally posted by dragbike425 View Post
          They bigger they are, the harder they fall.
          Broke the crank at about 155. Fortunately the rear tire never locked up and my wife got it stopped with both tires on the ground. It bent the motor plate and damaged the frame.






          WOW!!! I have been drag racing GSs since 1977 & NEVER seen anything , short of a Nitro motor, kill itself that GOOD!!!! Holy CRAP!!! Were YOU as amazed at seeing this as I am?!!! Got spares? Call me at 714--356-7845 if I can help. Nice block it killed too. Ray.

          Comment


            #20
            Thanks for the offer....back together now. Block needed a new sleeve, replaced crank with Falicon billet unit, 4 new pistons, 16 valves and had local chassis shop replace upright in the frame that got twisted.
            I've seen a few pretty close but not as bad as this. The guy she was racing got hit in the helmet from pieces flying off the bike.



            Comment


              #21
              You need to post these pics over on dragbike.com!!! Ray

              Comment


                #22
                So did the welds let go on the crank, cause that looks like a clean break ??


                Is that another crack on the main weld too ?

                Last edited by RacingJake; 10-13-2011, 08:09 PM.
                1166cc 1/8 ET 6.09@111.88
                1166cc on NOS, 1/8 ET 5.70@122.85
                1395cc 1/8 ET 6.0051@114.39
                1395cc on NOS, 1/8 ET 5.71@113.98 "With a broken wrist pin too"
                01 Sporty 1/8 ET 7.70@92.28, 1/4 ET 12.03@111.82

                Comment


                  #23
                  Originally posted by sschering View Post
                  Is it the rounded off dogs? won't stay in gear?
                  nope check out the inner bearing race. it is missing on the top from 10'o-clock to 2'o clock



                  wife riding opponent hit with schrapenel Whooo! I got to hear more!
                  SUZUKI , There is no substitute

                  Comment


                    #24
                    Originally posted by Eli69
                    the shamefullness here is subtle yet made the bike unrideable.

                    Geesh I feel dumb. you have a rounded dog in this picture that prevented you from riding?
                    SUZUKI , There is no substitute

                    Comment


                      #25
                      whatever.....
                      2002 bmw r1150gs 1978 gs1000E skunk les pew 1979 gs1000L dragbike
                      82 gs1100L probably the next project
                      1980 gs1000G the ugly 1978 gs750E need any parts?
                      https://m.youtube.com/watch?v=m_m2oYJkx1A
                      1978 gs1000E skunk #2 RLAP

                      Comment

                      Working...
                      X