1150 cams, then what?

[Guest]

So if I went with 1150 cams for my 80 1100 with mild port job, 1 mm over intakes, V&H, and flatslides, what else will I need?
Hardened rockers? HD valve springs?

[niclpnut]

The 1150 cams are drop in. You can degree them for a bit more hp. Slot or buy slotted sprockets.
Nic

[rapidray]

What Nic said. If it is ridden on the street, I would sett the cams at 108/106, exhaust at 108.
Ray.

[trippivot]

Not going to need fancy rockers - yes to springs and seals

do you have a manual camchain adjuster?

[Guest]

Not going to need fancy rockers - yes to springs and seals

do you have a manual camchain adjuster?

Not yet, I don't.