How to Tell if you Have a DEFECTIVE Commetic MLS Gasket

[posplayr]

See attached picture of the defective Cometic MLS gaskets that are provided in many of the Weisco 1166 kits.

The embossing around the oil ports are reversed. (high to low pressure and visa versa)

[Kaiser Sosei]

Wow! that's pretty bad. What other options are out there for the 1166? Can you still use OEM?

[posplayr]

3 options:

1.) try out the new and improved MLS
2.) Old standby Composit Cometic gasket (see attched picture and the following post)
3.) Trim an 1150 gasket to fit.


This is the Cometic Composit gasket

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=380305587545&viewitem=&sspagename=STRK%3AMEWAX%3AIT

[posplayr]

see attched pic of composite gasket

3 options:

1.) try out the new and improved MLS
2.) Old standby Composit Cometic gasket
3.) Trim an 1150 gasket to fit.


This is the Cometic Composit gasket


http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT

[Guest]

I've had good luck with the Cometic composite
Not so much with the MLS

Shut it down! It's ****ing oil
Not a good day

[posplayr]

I've had good luck with the Cometic composite
Not so much with the MLS

Shut it down! It's ****ing oil
Not a good day

That is because the cylinder decking was not pretty enough.

[Guest]

That is because the cylinder decking was not pretty enough.

He'll never live that one down.