Announcement

Collapse
No announcement yet.

Cleaning plastics for paint

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cleaning plastics for paint

    Here's a tip I got at the paint store.After sanding plastics clean them off with rubbing alcohol.Then spray with adhesion promoter.The sanding brings the mold release agents to the surface,the alcohol removes them.

    #2
    Good tip !

    R&E Paint Supply is your source of high end auto body supplies, paint, and equipment. Click here today to view our quality auto paint supply products!



    BULLDOG ADHESION PROMOTER is designed to promote paint adhesion to all automotive surfaces even problem plastics. Bulldog Adhesion Promoter works equally well on all flexible or rigid plastics, fiberglass, aluminum, glass, chrome, vinyl, galvanized metal, and painted surfaces. Bulldog acts as a tie coat by allowing several different surfaces to be painted at the same time to assure a smooth, flawless, durable finish every time.
    82 1100 EZ (red)

    "You co-opting words of KV only thickens the scent of your BS. A thief and a putter-on of airs most foul. " JEEPRUSTY

    Comment

    Working...
    X