Bolt Identification Resource

[Roostabunny]

This probably falls into the "General Shop Knowledge" category, but for those of us who do a wide range of projects (including GS work) Bolt Depot is the best source of fastener info I've ever come across.

The page of printable fastener tools alone makes it valuable, but I'm interested enough to read about all the different types so I know the right thing to ask for at the hardware store when I come across a new fastener puzzle.

May be old news, but I just discovered it today. Enjoy!

[Gorminrider]

Thanks Roostabunny...Always handy and there's always new folks coming aboard.
Add this per screwheads
JIS versus Phillips

http://www.webbikeworld.com/motorcycle-tools/jis-screwdrivers/vessel-jis-screwdrivers.htm

and we're good to go!

[tkent02]

Find the type of screw heads like the ones that hold the round cam covers on?

[Gorminrider]

Those are "Oval" heads" ?
Quoting from Roostabunny's link/pdfs "How Fasteners Basics.pdf -page 2"
"...low domed and countersunk heads used primarily for decorative purposes"

yeah, good point where to get Chromed ones!!! argh

[Guest]

http://www.ebay.co.uk/itm/8x-Stainless-Steel-Pozi-Cam-Cover-screws-Suzuki-02122-05127-GS1000-GS500-GS425-/261320369606?pt=UK_Motorcycle_Parts_13&hash=item3cd7e865c6

I just ordered some. If anyone's interested, I'll take comparison photos when they get here.

[Roostabunny]

I ended up just using stainless hex flat heads on my cam cover caps, which I was somewhat surprised to find at the local Ace. I have an idea that I can use my float glass to eventually polish the flat head to a mirror shine.

Edit: "float glass" is just a piece of plate glass that I attach sandpaper to for polishing machined surfaces on smallish parts, like when I'm rehab-ing hand tools.

[Guest]

Great info, thanks for posting