My chain is about 2mm off...I'm having a spacer cut for it today...just have to keep my ride time tame until then.
I did have to put some shims behind the upper strut bolts, but they're long enough to be more than accommodating with my shocks. I also had to bend the push rod on my master cylinder a bit to get it to clear my swingarm, also had to shim my muffler out about 1/4". Only real frustrating thing was a brace for the brake caliper. I ended up drilling and pressing a stud through the swingarm main spar and I tweaked a dogbone from an FZR600 to fit...haven't tried it out. I'm going to go beat on the rear brake here in a bit and see how it holds/stops...I'm probably going to have to do something different, but I guess we'll see.
stupid "10 pics per post" limit...bleh...

Comment