GS750B Tapered Steering Bearing Kit

[Yogi 1]

Which steering bearing kit would be the best choice for my 77 750B I had seen some notes about steering stem mods needing to be done for this install if so what are they and how difficult is the install procedure and if any special tools required. Thanks Yogi

[Guest]

I got an all balls bearing kit from, I think, Z1 enterprises - No modification required. However the upper & lower triple trees are now about 4mm further apart than with the old ball bearings, which hasn't been a problem.

That's for a 79 750

[BassCliff]

Hi,

http://www.goallballs.com/home.asp

Or if you want to buy your bearings "off the shelf":

Upper: 25 x 48 x 16
Lower: 27 x 48 x 14
Suzuki GS750B/C/EC/N (77-79), GS750D C/N (78-79), GS750EN/LN/LT (79-80)


Thank you for your indulgence,

BassCliff

[Detroit Diesel Man]

I have a 77 750 B and got mine from the local bearing supply house/machine shop....about 30% cheaper than anything i found online.


DDM

[SqDancerLynn1]

The early stem needed the lip machined down for the bearing to sit flush as I remember . Go to allballRacing.com should be info on the modifications needed