front brake question

[AdamJH]

I'm planning on changing out my front brake lines and I noticed that there's no diapghram or o-ring in my master cylinder. It's also leaking through the brake handle and only applys pressure when at 50% pull.
Obviously I've gotta fix this but does it matter what master cylinder I buy as long as I get the right fittings for the new brake line?
I also want to get new calipers because it takes a while to stop with the tiny ones that are on it. Are there different bikes I can salvage some bigger brakes from?
All this is for an 81 gs250t.
Thanks for any input, I appologise if its up on the forum somewhere already but I have a hard time with this phone internet.

[bobthebiker88]

before upgrading, get rebuild kits for the calipers, and master cylinders. you'd be astounded at how much difference fresh fluid and rebuilt master cylinders can make for a brake system.

[Guest]

Brakes

Yes, rebuilding everythign does wonders. But maybe, you could use a GSXR master instead? Or a 6-piston caliper? Sometimes, the master could be damaged beyond help and it's easier to replace it.
Laters
G

[AdamJH]

Thanks for the input. Looks like I'll try to rebuild the master and replace the brake lines first. Does a rebuild kit come with the gasket and diaphram that go in the cap, or is that seperate?

[cowboyup3371]

Mine didn't but ask the parts desk when you go in.

[bobthebiker88]

a good rebuild kit will come with everythng that was installed from the factory.