1984 gs1100gk rear brake not stopping

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • poker ran

    #1

    1984 gs1100gk rear brake not stopping

    Hi ive had the 1984 gs1100gk for a year and the rear brake will not stop the bike new pads complete disassemble and clean when the pedal in pushed it will slow the bike down but to stop i have to use the front brake . My question is this just the big bike and a single disk or what do i need to fix it. This is my first bike this heavy but love it any help will be taken and retuned if i can tks randy
  • bccap
    Forum LongTimer
    Past Site Supporter
    • May 2011
    • 27294
    • Vancouver B.C.

    #2
    I recently had fork oil all over my front disks. Sprayed Brakeclean on them and followed the directions. Did the back disk just because the can was in my hand. Front brake was back to it's old self, and could lock up rear at low speeds. I only have a 750 but there is 280b.'s on top. Don't know that will help you ?

    Comment

    • Nessism
      Forum LongTimer
      GSResource Superstar
      Past Site Supporter
      Super Site Supporter
      • Mar 2006
      • 35792
      • Torrance, CA

      #3
      Originally posted by bccap
      I recently had fork oil all over my front disks. Sprayed Brakeclean on them and followed the directions. Did the back disk just because the can was in my hand. Front brake was back to it's old self, and could lock up rear at low speeds. I only have a 750 but there is 280b.'s on top. Don't know that will help you ?

      If the brakes are not working properly you should tear down the system and clean out all the gunk. Relube the sliding parts with caliper grease and change the brake lines. No short cuts allowed with brakes.
      Ed

      To measure is to know.

      Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182

      Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846

      Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf

      KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection

      Comment

      • Guest

        #4
        Originally posted by poker ran
        Hi ive had the 1984 gs1100gk for a year and the rear brake will not stop the bike new pads complete disassemble and clean when the pedal in pushed it will slow the bike down but to stop i have to use the front brake . My question is this just the big bike and a single disk or what do i need to fix it. This is my first bike this heavy but love it any help will be taken and retuned if i can tks randy
        The front brakes are about 70% of the stopping power. You need to use the front brake correctly in order to stop any bike in a decent amount of time/distance.

        Comment

        • Guest

          #5
          I've spent lots of time and money to have the best front (and rear) brakes possible on my bikes, this is the RF900 setup on my '83 750.

          Comment

          Working...