Rear upper shock mount bolt

[Krunk_Kracker]

Does anyone know what size this is? Mine is missing and need to replace, but I cannot find out what size it is for the life of me. Z1 doesn't seem to to have it either.

[BassCliff]

Hi,

Part# 09145-10001, $1.77 at Partshark.com. Sorry, I know this doesn't help you with the bolt size.

http://www.partshark.com/fiche_secti...1981&fveh=2128


EDIT: I'm sorry, the above is for the nuts, not bolts. I thought the upper shock bolts were welded on the frame?

Thank you for your indulgence,

BassCliff

[UncleBen]

Not sure if we are talking about the same part, but the rear upper shock mount bolt on my '82 GS1100GL has a 10x1.25 thread. I had one of the threads shear off of mine so I bought a bolt locally, cut the head of it off and welded the threaded portion onto the stud. Worked like a charm.

[Krunk_Kracker]

Thank you to both of you, at least I know where to order it online now if I cannot find it locally.

UncleBen, it's the nut that goes on the bolt that the top of the rear shock mounts to, right below the seat.

[Hummer]

10 sounds right - I just ordered as many SS fasteners from Z1 as I could and wasn't sure of that measurement either, so I ordered 5 of every acorn nut. Oddly enough, SS metric fasteners are hard to find in Canada (at least in my corner). I'm not sure why I have to go back to you non-metric Americans to get my metric nuts and bolts, but I make sure to order in bunches so I don't have to wait 2 weeks everytime I need something new.

[Krunk_Kracker]

It's an M10 -1.25. I just went to the local fastener company and they measured it for me. They didn't have any though

[Hummer]

Just had to confirm on the Z1 site - their acorns are 1.5 - it did seem to be a tight fit but couldn't have been that bad, considering that all 4 threaded on without major difficulty!