Front brake rebuild

[Guest]

I can't find a front brake rebuild for a '77 gs750. I have found a rear brake, and a front for an 80-83 here:
http://www.partsnmore.com/parts/suzuki/gs750/?filters[category]=chassis

Will a kit for those years work for my bike and just have twice as many pieces for the dual discs? or is it a completely different caliper? Thanks for any help on this..

[rustybronco]

If the parts are available, order the boots and seals necessary to rebuild them from the factory. At least for me, that was the cheapest way to O/haul the front calipers on my GS1000EC.

[DannyMotor]

Let me know what you find out... this is my next step as well.

Also... how the hell you intend of getting the allen bolts out... mine are in there something fierce.

[GateKeeper]

follow the rebuild guided provided on BasCliffs web site

order the parts from the many bike parts places, IE Boulevard Suzuki, expect a long wait time

strip everything down, see if you need new pistons, if not just order all the rubber parts, boots, seals, etc

clean everything up really well, and reassemble, once your parts are in

some pics of my brakes

http://www.thegsresources.com/_forum/showthread.php?t=184389&page=21

.

[cj7jeep81]

I can't find a front brake rebuild for a '77 gs750. I have found a rear brake, and a front for an 80-83 here:
http://www.partsnmore.com/parts/suzuki/gs750/?filters[category]=chassis

Will a kit for those years work for my bike and just have twice as many pieces for the dual discs? or is it a completely different caliper? Thanks for any help on this..

I bought a rebuild kit from www.partshark.com for my rear caliper, looks like they have them for 77 gs750, so they should have it (they have different part numbers for B and EC). I bought the piston set for mine (my pistons were shot). Only cost a $10 or $15 more than the rubber pieces only, so made it easy.

Let me know what you find out... this is my next step as well.

Also... how the hell you intend of getting the allen bolts out... mine are in there something fierce.

i had to use an impact wrench on mine. bought some hex key bits, and they came right out.

[cowboyup3371]

Rebuild kits for the front MC are typically classified as the piston cup set (found at Boulevard Suzuki)

For the 750B
1.PISTON & CUP SET
59600-33810 1$44.78$33.05

and the 750E

1.PISTON & CUP SET
59600-45811 (replaces 59600-31827) 1$44.78$33.05