Not sure what to do with tires that came on my bike. The production code says they were made in 2006. They are dunlops with ZERO cracks , tread still has nubs on it so I'd say they have almost zero miles on them and I can easily push my finger nail into the tread. I know many will say is your life worth XXX and I understand that philosophy. I'm just looking to get this bike running and see how it is before I dump any xtra cash into it and it won't be ridden much at all this year. Bike (77 gs750) was given to me for free and could almost be considered a parts bike to some but compression is 140-150 across all cylinders and everything works. Looking for opinions
-
-
If they pass visual inspection, hold air and have sufficient tread I would run them. That is my opinion. Make sure you check the valve stem and core. No need to overlook that. -
It must have been stored indoors, out of the sun. I'd ride it, but I'd keep an eye on it too.
Realize the rubber may be hard and traction may be lacking, and keep checking for cracks. Wouldn't do any long high speed trips on it either.Comment
-
Certainly good enough for your current purposes of getting it running and such, plus some easy riding
Once you get to that point, you can decide if you want to change them1978 GS 1000 (since new)
1979 GS 1000 (The Fridge, superbike replica project)
1978 GS 1000 (parts)
1981 GS 850 (anyone want a project?)
1981 GPZ 550 (backroad screamer)
1970 450 Mk IIID (THUMP!)
2007 DRz 400S
1999 ATK 490ES
1994 DR 350SESComment
-
Thanks for the opinions. Compared tires to new ones and new rubber is much softer so I'll ride them lightly. I will definitely get new tires once bike is 100%.Comment
-
Sounds like your tires are just fine, no ozone cracks and that. If those tire were in my area at that age they would be replaced period. The heat here has a way of hardening tires.Comment
Comment