Tubeless Wheel Valve Stem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Charger739
    • Feb 2026

    #1

    Tubeless Wheel Valve Stem

    i went out today to ride in this nice and sunny weather and found my rear tire to be flat, checked it and the tube was flat. i have now decided to put a tubeless vavle stem in it but not sure which size i will need to use please any input would be appreciated
  • kdo58

    #2
    http://www.napaonline.com/Catalog/Ca...416_0215255096

    Comment

    • Charger739

      #3
      Did ya have to do any modification to the wheel?

      Comment

      • chuck hahn
        Forum LongTimer
        Past Site Supporter
        • May 2009
        • 25925
        • Norman, Oklahoma

        #4
        Put a dab of sealer on each side of the rim as you install them. Helps to stop any micro leaks around the hole.
        MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
        1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

        NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


        I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

        Comment

        • Guest

          #5
          Make sure the rim is marked tubeless.

          Comment

          Working...