1978 gs1000e Rear Rotor

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gregory
    Forum Sage
    Past Site Supporter
    • Sep 2012
    • 2064
    • Southlake - DFW - North Texas

    #1

    1978 gs1000e Rear Rotor

    Does anyone know what thickness is acceptable for a rear rotor?

    It is pretty badly grooved and guessing that it looks a little on the thin side.

    New ones on ebay are about $200 which is WAY out of my budget.
    82 gs1100e FAUX Skunk
    80 gs1000s
  • Agemax
    Forum Guru
    • Apr 2008
    • 8371
    • plymouth uk

    #2
    the service limit is 6mm but if they are really badly scored then it will not do your pads much good. if there is still a good thickness you could see about getting them skimmed
    1978 GS1085.

    Just remember, an opinion without 3.14 is just an onion!

    Comment

    • Agemax
      Forum Guru
      • Apr 2008
      • 8371
      • plymouth uk

      #3
      you can buy good ones from ebay, like this one......



      good condition and quite cheap
      1978 GS1085.

      Just remember, an opinion without 3.14 is just an onion!

      Comment

      • Gregory
        Forum Sage
        Past Site Supporter
        • Sep 2012
        • 2064
        • Southlake - DFW - North Texas

        #4
        Much appreciated !
        82 gs1100e FAUX Skunk
        80 gs1000s

        Comment

        Working...