help me with my brake line purchace

[detorn]

so title says it, need to replace my lines. just want to make sure I'm B) getting the right thing. B) getting everything I need.

here is an exploded view of the parts. I measured the parts and this is what I've got.

the lines are 14'
the caliper interior diameter is 8.7
the adapter has a male 9.7 and a female 9.2
the male part of the lines are 9.7
the banjo opening is 10.3



caliper and adapter



curve on banjo 35 degrees?




I'd like to keep the 2 into 1 adapter since it doesn't save anything to go to just two 28s. what do I need?

the bolts all look good so I think I can reuse those. do I need new washers (crush washers?) or can I reuse these?

I'm thinking...
3 of these
3 of these
1 of these
answers that question
2 of these?

is that everything? is it too much, not enough?

thanks a bunch

[GateKeeper]

see if this place has what you need

http://stores.ebay.ca/Rennsport-Auto-Parts/_i.html?_nkw=suzuki&submit=Search&_sid=5680214

if not let Raymond know directly at

http://www.rennsportautoparts.com/

see email address on the front page

or here

http://www.apexbrakes.com/

this should get you going....

.

[Nessism]

Those Z1 Goodrich lines will work fine. My personal preference is to build my own lines from Earl's components though. Components made in USA, assembly work performed by you. http://www.thegsresources.com/_forum...d.php?t=114521

[spyug]

As friend Gatekeeper says Apex lines are the cats azz and as a bonus, Raymond already has the dimensions on record since he made me 550 lines last year.

Everything for around $100 taxes in (maybe anothe $15/20 for shipping) now how can you beat that? And no we don't get a kickback from him.

Cheers,
Spyug

PS Just posted by Gatekeeper, our new lines for the FZs http://yamaha-fz750.blogspot.ca/

[BigD_83]

As friend Gatekeeper says Apex lines are the cats azz and as a bonus, Raymond already has the dimensions on record since he made me 550 lines last year.

Everything for around $100 taxes in (maybe anothe $15/20 for shipping) now how can you beat that? And no we don't get a kickback from him.

Cheers,
Spyug

PS Just posted by Gatekeeper, our new lines for the FZs http://yamaha-fz750.blogspot.ca/

Did Raymond make up your lines for the stock handlebars?

[GateKeeper]

Yes Spyug had stock bars on the 550

.

[Agemax]

i just bought one of these lines for my hydraulic clutch.....

http://www.ebay.co.uk/itm/Stainless-steel-braided-brake-lines-100-800mm-VENHILL-/181078834199?_trksid=p5197.m1992&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D14%26meid%3D7313354927206084127%26pid%3D100015%26prg%3D1006%26rk%3D1%26sd%3D181078834199%26

Venhill are a good make and the price is OK, should get it tomorrow

[detorn]

pulled the trigger on the renns auto parts lines. added a master cylinder rebuild kit while I was on ebay too... this bike will run right again I promise you...lol

thanks to all for the input