Rattling front end.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Planetsmasher
    • Feb 2026

    #1

    Rattling front end.

    Tick tick tick tick.... faster as the bike moves faster, not as RPM's increase. When I touch the front brake even the slightest tiny bit, it stops. Could the pads be moving around inside the calipers? I cannot see anything amiss when I get off and look.

    Can anyone relate to this?
  • dorkburger
    Forum LongTimer
    Past Site Supporter
    • Jan 2013
    • 10770
    • Stupid Freehold Boro NJ

    #2
    Probably that or possibly the speedometer drive.
    sigpic
    When consulting the magic 8 ball for advice, one must first ask it "will your answers be accurate?"

    Glen
    -85 1150 es - Plus size supermodel.
    -Rusty old scooter.
    Other things I like to photograph.....instagram.com/gs_junkie
    https://www.instagram.com/glen_brenner/
    https://www.flickr.com/photos/152267...7713345317771/

    Comment

    • Guest

      #3
      What year and model bike? what you may be hearing is the vented rotors passing through the brake pads. I grind a little taper on the leading edge of my pads when they are new to prevent this

      Comment

      • BIG_brother

        #4
        Its clearly the brakes.. check your rotor for trueness, rust or scarring

        Comment

        • Agemax
          Forum Guru
          • Apr 2008
          • 8371
          • plymouth uk

          #5
          yep, if you have drilled or slotted discs, it is the pads. either slightly binding or as you say, rattling a bit in the caliper
          1978 GS1085.

          Just remember, an opinion without 3.14 is just an onion!

          Comment

          • chuck hahn
            Forum LongTimer
            Past Site Supporter
            • May 2009
            • 25925
            • Norman, Oklahoma

            #6
            The 78 1000C of mine had this problem. The outer side pad was a bit sloppy fitting in the recess, so I took the pad and wrapped a layer of electrical tape around the perimeter to snug it up a bit. Problem stopped and hasnt returned.
            MY BIKES..1977 GS 750 B, 1978 GS 1000 C (X2)
            1978 GS 1000 E, 1979 GS 1000 S, 1973 Yamaha TX 750, 1977 Kawasaki KZ 650B1, 1975 Honda GL1000 Goldwing, 1983 CB 650SC Nighthawk, 1972 Honda CB 350K4, 74 Honda CB550

            NEVER SNEAK UP ON A SLEEPING DOG..NOT EVEN YOUR OWN.


            I would rather trust my bike to a "QUACK" that KNOWS how to fix it rather than a book worm that THINKS HE KNOWS how to fix it.

            Comment

            • Planetsmasher

              #7
              Great! Thanks guys, I'll have to pull it apart and have a closer look. Much appreciated.

              Comment

              Working...