Sonic fork springs
Collapse
X
-
Guest
Sonic fork springs
I'm about to install some new Sonic springs in my 80 GS1100E forks, any of you GSRers done this yet? I about freaked when I saw how much shorter the Sonic springs were, so I called, and was told it was the norm lol. Just follow the instructions with the springs. Thought I would ask if anyone has done this swap yet and any thoughts you could share on yours.Tags: None -
Found these threads using the search feature.
Would you like to share the experiences you have had with a new accessory, part or vendor? Post your review here.
Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
jwhelan65 -
SVSooke
Bought Sonics for the 06 SV650S of my user name.They where great.Just cut the spacer the way the instructions say and enjoy.Comment
-
Guest
Well anyways, I'm leaving the air valve on the forks and using them for spacers for the headlight mounts, if I don't I would have to make some spacers, so just leave them on and not use them, I plugged off the hole though.
If it wasn't for some cotton BT testing this morning I would sneak into the shop and install the springs lol.Comment
-
Guest
UpDate on my Sonic springs
Got the springs installed. They seem to be working great! Funny thing is the fork tube preload adjustment caps hardly have any tension on them. I followed the instructions to the word (using my correct measurements). I don't have a lot of preload on them and they work just fine.Comment
Comment