Announcement

Collapse
No announcement yet.

Progressive springs install GSX400

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Progressive springs install GSX400

    I'm rebuilding my forks with new bushings,oil seals and progressive springs.
    the fork is 33mm.
    the springs came with a short pvc spacer(about 1/2"),so i assume i need to use it?
    Didn't get any list of lengths for the spacer.
    Also, do i need to use treadlock on the bottom alen bolt?
    Haynes manual says to use sealant near the cap and glue on the rest.

    Eran

    #2
    If you ordered the springs for "your" bike, what progressive sent should be what you use. I bought two sets for my bikes and all came with instructions. Yes you should use a thread lock on your bolt, don't want that ever coming loose. terrylee

    Comment

    Working...
    X