Announcement

Collapse
No announcement yet.

Replacing front Master cylinder sight glass

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Replacing front Master cylinder sight glass

    Using the search feature turns up several threads on replacing the oil sight glass but nothing on the front master cylinder glass. Is it the same process? Do you just pry off that shiny ring from the inside then press the glass out?

    This is on a customers 85 Kat 750.

    Paul
    80 gs1100 16-v ported & polished, 1 mm oversize intake valves, 1150 carbs w/Dynojet stage 3, plus Bandit/gsxr upgrades

    #2
    There are threads about it. Some guys have used watch crystals, some little round mirrors. Keep searching.


    Life is too short to ride an L.

    Comment


      #3
      Found the one I used http://www.thegsresources.com/_forum...d.php?t=172431 far back in my subscribed threads.

      Comment


        #4
        watch crystal worked good for me.
        1983 GS 1100 ESD

        Comment

        Working...
        X