This is the threaded plate on the bottom fork yolk that the 2 off 8mm clamp screws go in to, does anyone know the thickness of the plate as mine are missing.
Thanks Russ
Thanks Russ
-
Last edited by Guest; 03-04-2014, 02:59 PM. -
Why not just use nuts?Ed
To measure is to know.
Mikuni O-ring Kits For Sale...https://www.thegsresources.com/_foru...ts#post1703182
Top Newbie Mistakes thread...http://www.thegsresources.com/_forum...d.php?t=171846
Carb rebuild tutorial...https://gsarchive.bwringer.com/mtsac...d_Tutorial.pdf
KZ750E Rebuild Thread...http://www.thegsresources.com/_forum...0-Resurrection -
I would not be using "just nuts" in place of that part either. Some backyard hack might.
Anyway, why not just order a pair of them if you need both?
http://www.partsoutlaw.com/OEMpartfi...STEM/02320002/
Or get your local Suzuki store to order them and pay for the shipping and you will just pay the retail price plus tax for those parts.
Comment
-
thanks
thanks GSX, nuts were fitted looked crap, my plan was to make the plates out of stainless.I would not be using "just nuts" in place of that part either. Some backyard hack might.
Anyway, why not just order a pair of them if you need both?
http://www.partsoutlaw.com/OEMpartfi...STEM/02320002/
Or get your local Suzuki store to order them and pay for the shipping and you will just pay the retail price plus tax for those parts.
RussComment
Comment