'82 11e foot peg

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Rob S.
    Forum Guru
    Past Site Supporter
    • Dec 2013
    • 9412
    • New York City
    #1

    '82 11e foot peg

    I have a brake pedal on the way, I was wondering what to do about the foot peg.

    I've been advised to get a new one, that that would be more cost-effective than having my mechanic heat and hammer the current one back into position. I was just curious if a new or used one would come with the mounting bracket, as that is where the majority of the damage appears to be.
    Attached Files
    1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

    2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.
    Tags: None
    • JEEPRUSTY
      #2
      aluminium does not forgive
      get a replacement

        Comment

        • Rob S.
          Forum Guru
          Past Site Supporter
          • Dec 2013
          • 9412
          • New York City
          #3
          Another view.image.jpg

          I also have no idea how the mechanic will replace the bracket, as all I see are what appear to be two large rivet heads.

          Anybody have the part(s) for me?
          1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

          2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

            Comment

            • blowerbike
              Forum Guru
              GSResource Superstar
              • Aug 2008
              • 7057
              • Ohio Closer to KY Than Cleveland
              #4
              the peg Assembly is just that...an assembly.
              the aluminum bracket for the rear peg is not part of the front peg.
              Bill did not have these parts?

                Comment

                • Rob S.
                  Forum Guru
                  Past Site Supporter
                  • Dec 2013
                  • 9412
                  • New York City
                  #5
                  Still waiting to hear.
                  1982 GS1100E V&H "SS" exhaust, APE pods, 1150 oil cooler, 140 speedo, 99.3 rear wheel HP, black engine, '83 red

                  2016 XL883L sigpic Two-tone blue and white. Almost 42 hp! Status: destroyed, now owned by the insurance company. The hole in my memory starts an hour before the accident and ends 24 hours after.

                    Comment

                    Previous template Next
                    Working...