GSX1100 ally swing arm witdh

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sharpy
    • Feb 2026

    #1

    GSX1100 ally swing arm witdh

    Anyone have a GSX Alloy arm at there disposal and can measure from inside to inside where the chain adjusters sit please. Just the bare arm. Mine is almost 260mm. Not interested in a guess when bike sitting there. prefer one when its apart or doing a tyre change. Just need checking thanks
  • steve murdoch
    Forum Guru
    Past Site Supporter
    • May 2004
    • 8492
    • St. Catharines, On.

    #2
    I get 10-5/16" or 262mm.
    2@ \'78 GS1000

    Comment

    • sharpy

      #3
      Originally posted by steve murdoch
      I get 10-5/16" or 262mm.
      Close enough. Thanks. Doing a very basic cad drawing of wheel and axle/spacers and have a 25mm space left over. Trying to line up a early GSXR1100 wheel in there as well with out getting my hands dirty in garage, lol. I know what fits just mucking around.

      Comment

      • sharpy

        #4
        So anyone have a wire wheel in a alloy gsx1100 swingarm. And do they have the 5mm spacer between the disc and hub? My measurements suggest you have to have one. Cant double check as i have a McKintosh arm on my good 1000.

        Comment

        Working...