82 1100E Fork Rebound Adjuster Details and O-Ring Size?

[Guest]

One of my fork rebound adjusters is weeping a bit of oil and I would like to pull it apart and replace the o-ring before winter hits and it spends the next 6 months leaking. I have not been able to find any of the details of the adapter in my service manual or online so far. Does anybody have a parts diagram for the adjuster and the size of the o-ring(s) that are on it? I had it apart 12 years ago when I first bought the bike and went through everything but I can't remember what is in there and no parts needed replacing at that time, so I have no records of the bits inside.

All help is appreciated.


Thanks,
Mark

[radbassist]

Hope this has them...

http://www.suzukipartshouse.com/oemp...-gs1100e-parts

[Guest]

Hope this has them...

http://www.suzukipartshouse.com/oemp...-gs1100e-parts

No dice, it is the same fork diagram as I have found elsewhere. It's like the rebound adjuster is a black box that no one ever needs to service or look at. I may just have to pull it apart and measure the o-ring.


Mark