Gs550 swingarm options

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Guest

    #1

    Gs550 swingarm options

    Just a quick question -

    1100E alloy swingarm into GS550E frame ....... is it a straight fit like 750/1000/1100 or is width an issue ??
  • steve murdoch
    Forum Guru
    Past Site Supporter
    • May 2004
    • 8492
    • St. Catharines, On.

    #2
    page 3 of this thread says it can be done with a bit of modification.
    Re: GS 550E 1980 -cafe build Just a little disc upgrade completed. Drilling rotors to fit bolts: EBC contours for cbr600, together they weigh about the same as the one 550 rotor and are about the same size, they are much larger than the 650 discs. Next up: Splitting cases on the 550.


    Chuck78 should be along with some input.
    2@ \'78 GS1000

    Comment

    • Guest

      #3
      Thanks - just throwing some ideas around in my (somewhat warped) brain.

      I've got a lot of stuff left over from the current build and toying with a 550/GSXR/oil cooled katana/1100E mongrel

      done in an ear,y 80's endurance racer style

      Comment

      Working...