Does anybody have any feedback on the YSS emulators, im thinking of a set for my GS1000 with Hagon progressive springs. Part number I was thinking is YSV265.
Thanks.
Thanks.
-
My bikes 79 GS1000 1085 checked and approved by stator the GSR mascot :eagerness: and 77 GS750 with 850 top end, GS850g, and my eldest sons 78 GS550, youngest sons GS125. Project bike 79 GS1000N -
Im using them on my GS now. They work great and were allot less expensive than the Racetech Gold valves.1982 GS1100E "Jolene" -
Thanks for that info TxGSriderMy bikes 79 GS1000 1085 checked and approved by stator the GSR mascot :eagerness: and 77 GS750 with 850 top end, GS850g, and my eldest sons 78 GS550, youngest sons GS125. Project bike 79 GS1000NComment
-
Rather than getting progressive springs (from whichever company), I would suggest straight-rate springs.
Sonic is a good place to get them.
A lot more affordable, too.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
I concur on the straight rate springs over progressive. Sonic is a great supplier but OP is in the UK so Hagon may be a better deal for him.Rather than getting progressive springs (from whichever company), I would suggest straight-rate springs.
Sonic is a good place to get them.
A lot more affordable, too.
.
MarkComment
-
Sho' 'nuff. I missed that little detail.
.sigpic
mine: 2000 Honda GoldWing GL1500SE and 1980 GS850G'K' "Junior"
hers: 1982 GS850GL - "Angel" and 1969 Suzuki T250 Scrambler
#1 son: 1986 Yamaha Venture Royale 1300 and 1982 GS650GL "Rat Bagger"
#2 son: 1980 GS1000G
Family Portrait
Siblings and Spouses
Mom's first ride
Want a copy of my valve adjust spreadsheet for your 2-valve per cylinder engine? Send me an e-mail request (not a PM)
(Click on my username in the upper-left corner for e-mail info.)Comment
-
I would think that going to the distributor: http://www.yssusa.com/index.html would be the best bet. I got my shocks directly from the U.S. location in New Jersey.Comment
-
I already have Hagon springs fitted, and Brookbarn parts sell the valves also wemoto.com price is about ?68.
Thanks for the responseMy bikes 79 GS1000 1085 checked and approved by stator the GSR mascot :eagerness: and 77 GS750 with 850 top end, GS850g, and my eldest sons 78 GS550, youngest sons GS125. Project bike 79 GS1000NComment
Comment