GS1150 Swing Arm Swap

[Guest]

Hello all, I recently began a project to swap an 1150 swinger onto my gs750 frame. I have the swingarm, shock, and the lever. I think I am missing a couple of bolts. Can someone with a GS1150 please share pictures of their rear suspension so that I can see what an assembled unit looks like? I'm interested to see the shock mount that is part of the frame of the motorcycle so that I know what I need to fabricate for this.

I have tried googling and searching on this forum, but I cannot find anything helpful on this.

Thanks!!
-Len

[dorkburger]

I can try to grab some pics later. I have one disassembled in the garage attic.

[dorkburger]

Found this old ebay pic of the bracket and arm.

[steve murdoch]

Parts fiche might help.

https://www.bikebandit.com/oem-parts/1985-suzuki-gs1150ef/o/m6009#sch275011

[stevef.]

That is a bit helpful, I have that lever part that's pictured but not the triangle it's attached to. Where does that all bolt to?

Found this old ebay pic of the bracket and arm. [ATTACH=CONFIG]56878[/ATTACH]

thanks!
-Len

[stevef.]

Parts fiche might help.
https://www.bikebandit.com/oem-parts...6009#sch275011

ive seen this and the one for the shock. Unfortunately I cannot find one containing the parts where the shock mounts to the swingarm. That's the part I'm missing

[stevef.]

I can try to grab some pics later. I have one disassembled in the garage attic.

this would be awesome if you could sort of set it all up so that I can see how it goes together!! Like I said, I know I'm missing a couple parts, but I don't know what because I cannot find any pictures of an assembled gs1150 rear suspension. I would GREATLY appreciate if you could post some pics!!

thanks,
-Len