Use of plugs on tires

[Guest]

I'm sure I will get a fair number of comments advising me not to plug a tire. I assure you I will read and take all under advisement. However having ridden on plugged tires for many many miles over the years, I am also comfortable with doing so again.

I have a rear tire on my '81 GS850G with very low mileage that caught a puncture from a steel staple when it had about 1500 miles on it. I wish to plug this puncture to get some additional use from it before springing for a new set.

Quaestion is the RED Slime plugs I got do not mention using rubber cement. In past when a mechanic plugged a tire or two for me, he used rubber cement. I see Slime sells kits with and without cement so I am wondering if it is not an extra bit of security to used the cement as well or is that cement for other types of plugs as the kits seem to come with plack plugs and the red ones only come by themselves.

OK, here I am, waiting to hear all sides of the argument.

Thanks, as always for your input.

DH

[Gorminrider]

True,
no mention of glue,
the colour is the clue. (I'm a bad poet and I knoet

They are not obvious about the difference, but as a guess, I think those red ones are for garden tractors and atvs. Low pressure tires? I'd try them with glue.

ADD Or better, just get some black ones that are definitely for cars

[LAB3]

The best way to do it is to unmount the tire and patch the hole from the inside, you'd use the same flat type patch and rubber cement used on tubes.

[Guest]

True,
no mention of glue,
the colour is the clue. (I'm a bad poet and I knoet

They are not obvious about the difference, but as a guess, I think those red ones are for garden tractors and atvs. Low pressure tires? I'd try them with glue.

ADD Or better, just get some black ones that are definitely for cars

There, I learned something. Haven't opened the package so I can return & get black.

Thanks Gorminrider, stay safe!!

DH

[Gorminrider]

Oh, thanks! you too! But you know, I begin to wonder why ALL tire plugs aren't red so they are easy to spot on the tire...

[Guest]

The best way to do it is to unmount the tire and patch the hole from the inside, you'd use the same flat type patch and rubber cement used on tubes.

Funny you should mention that. I was thinking to put that inner patch in anyway. I had actually started this repair a ways back but ended up getting a new tire installed because my very conservative buddy told me it was safer. That tire has about 800-1000 miles left on it. The front has about 1200-1500 miles to go. The punctured tire really has a lot of meat left & I wanted to use it until the front was retired and then put a new pair on at the same time.

The hole I had started and put a plug in still leaked back then. (The puncture was from a staple I must have picked up from our bee hive building activities so there were really 2 small side by side punctures. I guesses I got the first and thought I picked them both up. I really want to use an inner patch but I want to use a plug to fill in the hole (a 3/16" rod is a tight fit) that remains from that first plug. I plan to try & push a plug in but push it out quick before the glue dries so the inner surface where the patch goes will be completely flat and not interfering with the patch. Then I want to cut the outside remains of the plug off. The patch will be doing all the sealing but the new plug will fill in the hole that is already there. Like a pothole repair.

I am a slug of a rider so really don't stress the tires on the road. If I was one of the speed guys, I'd never do this but as I said I am very comfortable with the patch doing 100% of the sealing and the plug is just to fill in that probably 1/8" hole.

Thanks,

DH

[salty_monk]

There is a brand of plug recommended by Bwringer that you can do from the outside. Not sure it’s a permanent fix though. As stated patching it from the inside would be the better way to do it...

[dorkburger]

I picked up a drywall screw on a trip and bought a plug kit from a local shop. They were the mushroom type, no glue used. I rode for at least another season wit it.
When the tire was replaced, I tried to pull out the plug from the mushroom head on the inside of the tire. It wouldn't come out.

[dorkburger]

Come to think of it, I wonder if the rubber plugs in the kit I bought back in 2014 have a shelf life similar to tires.

[Guest]

safety seal

[Maddevill]

When I was in Japan riding with the VFR club, I rented a Kawasaki ZXR400R. That thing had at least 5 plugs
in the front tire. I had to haul ass to keep up with these guys and, after a few miles, forgot about the tire

Mad

[Guest]

So here is my question to Slime themselves, and the reply:

I have purchased your tire plugs, (deep red color) to patch a nail hole in a tubeless bias-ply motorcycle tire. I asked 2 very experienced MC mechanics if I need to also use the rubber cement along with the plug. One of them says it is not necessary, the other one swears it is and he has always used rubber cement whenever he plugs a tire for nearly 40 years. I know the instructions do not mention using cement but my question is would it do any harm to use rubber cement smeared on the puncture hole & the plug?

And they say:

Thank you for contacting ITW Tire Repair.
It is used as a lubricant. It?s just a preference to use it or not. We have actually stopped putting it in some of our tire plug kits.

So if there was the slightest issue or even no real issue I figure they would put the kybash on the use of cement. Being that it helps as a lubricant, is even more reason to use it as I want to quickly push the plug back out just enough to eliminate any of it sticking inside & interfering with the patch laying flat. BTW the patch kit I got is a Slime product with 3 different sized patches and a tube of cement to boot. Package says it is for radial tires but I doubt it wouldn't work just fine on my MC bias belt tire. Found it at Tractor Supply for $3.19.

[GS1150Pilot]

This kit?

[Gorminrider]

I've used lots of plugs on the side of the road due to a job I had. The wheel needn't be taken off. Get your 12volt pump running and go from there. Never without cement. They were fine.

But unless you expect to get a lot of flats, and unless your tire is really new, or lastly you are broke (nothing wrong with saving $) still, if you're flush, why not just GET A NEW TIRE? No more worry, though the practise is useful.

[Gorminrider]

It's not hard to see where my low-pressure-ATV-Lawn tractor theory comes from.