Gs 650g Rear brake pads not engaging when pumping the brakes

[Sarcvicious]

This is related to another post I made.

caliper and rear master cylinder is rebuilt. No leaks in the new lines. I’ve used the mity vac to try and pull fluid through the brake lines, and only small dripples are coming out.

Moreso, when I pump the rear brake, the brake pads don’t engage which leads me to think I rebuilt the caliper or something’s off with the piston. HELP! I don’t know what else to trouble shoot.


gs 650

[timebombprod]

This is related to another post I made.

caliper and rear master cylinder is rebuilt. No leaks in the new lines. I?ve used the mity vac to try and pull fluid through the brake lines, and only small dripples are coming out.

Moreso, when I pump the rear brake, the brake pads don?t engage which leads me to think I rebuilt the caliper or something?s off with the piston. HELP! I don?t know what else to trouble shoot.


gs 650

siphon the rear bleeder with a clear vinyl tube and run it into the brake fluid bottle, dont have to suck on it just let gravity work, refill resevoir on master cylinder and just cycle it like that a few times, close resevoir and give it some pumps, fill the resevoir up all the way and it should be good.